AgaMatrix Jazz Specifications download pdf (Page 31)

[6] Final Steps

Remove the Test Strip: Remove

the used AgaMatrix WaveSense

JAZZ Test Strip. The AgaMatrix

WaveSense JAZZ Meter will

automatically deactivate.

IMPORTANT: If you do not remove the used test strip after

3 minutes of testing, the meter will deactivate. To activate

your meter with a used test strip still in the meter, press the

CHECK (

) button once. Do not attempt to apply blood or

control solution to an already used test strip.

Remove the Lancet: When you

have finished testing, snap off

the cap from the lancing device.

Be careful not to touch the lancet tip.

Place the lancet cover onto a hard, even surface

(such as a tabletop) with the open-end facing

up. While the lancet is still in the lancing device,

bring the lancet tip to the lancet cover to recover

the used lancet. You can then safely handle the

used lancet.

Extract the lancet from the

lancet holder cup by pulling on

the plastic collar of the lancet

(near the middle of the lancet).

Replace the lancing device cap

onto the lancing device until it

snaps or clicks into place.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 65 66

No comments

AgaMatrix Jazz Specifications Page 31