AgaMatrix Jazz Specifications download pdf (Page 61)

CAUTION: When the battery symbol appears, you should

replace the batteries immediately. Only use CR2032 batteries.

Your AgaMatrix WaveSense JAZZ Meter comes with two

pre-installed, CR2032, 3 volt, lithium batteries. Battery #1

powers the backlight and battery #2 powers the basic meter

functions. When the power from battery #2 is low, the low

battery symbol or dead battery symbol will be displayed on

the screen until you change battery #2. When replacing bat-

tery #2, the time and date information may be lost after the

battery is removed from the meter. If this happens, activate

the meter after installing the new battery and it will prompt

you to set the time and date. Correct time and date settings

are needed to get correct averages. Removing the batteries

does not affect the meter’s memory or previously stored user

settings, such as time format, alarms, etc.

Note: Dispose of used batteries according to your local environ-

mental regulations. Your meter is an electronic device. When dis-

posing of your meter follow all local environmental regulations.

Batteries

CHAPTER

1 2 ... 56 57 58 59 60 61 62 63 64 65 66

No comments

AgaMatrix Jazz Specifications Page 61